Course Overview
This full certificate program is suitable for experienced or inexperienced operators of truck mounted cranes. The program may be tailored to address the specific needs of each application as required.
Topics covered include:
Theory: 4-hour session (Depending on Application)
- Introduction
- Definitions and Terminology
- Explanation of Legislation, Standards, and Guidelines New CSA B167-08
- Pre-Operational Inspection (In-Class and On-Floor)
- Basic Principles, staging hazard identification outrigger set-up.
- Slings, Attachments, and Lifting Hardware
- Safe Operating Guidelines
- Pedestrian Safety
- Load Turning and Hand Signals
- Summary
- Written Test
Practical: (Conducted Individually)
Practical evaluations require up to one hour per person (Depending on application) or more for newer operators and are conducted in actual work environment whenever possible
| Pre-Operational Check | Hitches And Angles |
| Inspections Of Slings, Hardware | Taking Out Load Swing |
| Planning The Lift | Turning Of Loads |
| Slinging/Rigging | Competency Test |
** Call for the next available course dates!